Guangzhou DUBAO Electronics Technology Co., Ltd.
Welcome to the Professional Audio Kingdom!
Add to Cart
Dual 10" Line Array Speaker V8 , 3-Way Passive Line Array Loudspeaker
The 3-way dipolar, passive loudspeaker shall consist of two 10" low frequency driver with a neodymium magnet assembly, one 8" mid range driver and two 1.4" exit neodymium compression drivers with 2.5" diaphragms mounted to a dedicated wave shaping device and a passive crossover network. The loudspeaker shall only be operated by a dedicated, compatible controller amplifier.
The cabinet enclosure shall be made from marine plywood with an impact and weather protected PCP (Polyurea Cabinet Protection) finish.The drivers shall be protected by a rigid metal grill backed by an acoustically transparent foam. The cabinet shall incorporate one handle in each side panel and two additional recessed grips at the rear bottom.The cabinet shall incorporate three-point rigging system for the assembly of vertical line source arrays of up to 24 cabinets in conjunction with a dedicated flying frame.
The connection panel on the back shall be recessed and fitted with speakon NLT4 F/M sockets (NL4 M or EP5 connectors as an option).
The loudspeaker shall have a nominal horizontal dispersion angle of 80°. The vertical dispersion angle of the assembled array shall be determined by the geometry of the splay angles between the cabinets, which shall be adjustable in a range of 0° to 14° in 1° increments.
| System data | |
| Frequency response (–5 dB standard) | 67 Hz - 18 kHz |
| Frequency response (–5 dB CUT mode) | 100 Hz - 18 kHz |
| Max. sound pressure (1m, free field) | |
| with D20/30D | 139 dB |
| with D80 | 142 dB |
| Cabinets per amplifier channel | 2 |
| Loudspeaker data | |
| Configuration | High performance 3-way passive line array loudspeaker |
| Nominal impedance | 8 Ω |
| Power handling capacity (RMS/peak 10 ms) | 500/2000 W |
| Nominal dispersion angle (horizontal) | 80° |
| Splay angle settings | 0° - 14° (1° increment) |
| Components | 2 x 10" driver / 1 x 8" driver |
| 2 x 1.4" exit compression driver | |
| passive crossover network | |
| Connections | 2 x NLT4 F/M |
| optional 2 x NL4 or 2 x EP5 | |
| Dimensions, weight | |
| Dimensions (H x W x D) | 310 x 700 x 460 mm |
| 12.2 x 27.5 x 18" | |
| Weight | 34 kg |
| 75 lb | |
