
Add to Cart
Bridge 8Ω 2x4400W , FP10000Q Switch Mode Power Supply Amplifier
FP10000Q
FP series professional amplifier adopt Teflon silver-plated wire on the PCBs and transformer coil, has low resistance, high cooling efficiency, high temperature resistance and high efficiency, improve the sound quality substantially.
1. Light Weight Design. It is one of the best product choice for touring performance and fixed install.
2. Ensure that each power transistor is with the temperature consistent, and the intelligence cooling system is also added, so as to ensure the whole machine to work with security and stability for a long time.
3. With advanced switch mode power supply back-up. It can not only provide a stable output, even if under condition of the deviation of 20% of the electricity, but also can ensure the beautiful sound.
4. High Efficiency Colling System. High purity red copper radiator is applied for the final stage power amplification circuit, which is large area, small size and short duc
5. Suitable to match any one of speakers, provided great convenience for audio projects.
6. Four types of power adjustable switch was designed on the rear panel, the left and right channel can output different power independently, with signal sensitivity switch. Suitable to match any one of speakers, provided great convenience for audio projects.
Model | FP10000Q |
Output Power | |
8Ω | 4x1300W |
4Ω | 4x2485W |
2Ω | 4x2500W |
Bridge 8Ω | 2x4400W |
Bridge 4Ω | 2x4800W |
Frequency Response | 20Hz-25KHz (±0.5dB) |
THD+N | <0.1%(rated power,4Ω,1KHz) |
S/N Ratio | >110dB |
Input Impedance | 20KΩ Balanced/10KΩ Unbalanced |
Damping Factor | 800 |
Input Connector | 3 pins XLR (NEUTRIK) |
Output Connector | SPEAKON (NEUTRIK) |
Protection | soft start, short, DC, over heat, RF, UHF, CPL |
Power Supply | AC200-240V/50-60Hz |
Dimension | 483 x 380 x 88 mm |
Packing Dimension | 575x485x175mm |
Net Weight(kg) | 13 |
Gross Weight(kg) | 14.5 |